Welded Pipes - ERW

Product Details:

Mild Steel (MS) Tube are manufactured using low carbon (less than 0.25%) steel. Due to low carbon content the pipes do not harden and are easy to use. As MS Pipes are made from mild steel they can easily be welded and formed in various shapes and sizes for pipelining and tubing purposes.

Product Details:

Mild steel pipes or MS pipes are used for the purpose of plumbing, firefighting, heating, ventilation and air conditioning. These pipes are perfectly suitable in several industries and various engineering applications. These pipes are manufactured using low carbon

Product Details:

MS square steel pipes are basically tubular products made with a weld, either from plates, sheets, coils, strips or bands.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Square Hollow Section Pipe, also known as SHS are commonly used as standard steel frames which can be loaded from different directions in the structural applications of buildings. RHS Steel uses are endless as its smooth flat surfaces can make construction easier.

Product Details:

MS square steel pipes are basically tubular products made with a weld, either from plates, sheets, coils, strips or bands.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Mild Steel (MS) pipes are manufactured using low carbon (less than 0.25%) steel. Due to low carbon content the pipes do not harden and are easy to use. As MS Pipes are made from mild steel they can easily be welded and formed in various shapes and sizes for pipelining and tubing purposes.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Electric Resistance Welded (ERW) pipe is manufactured by cold forming a flat steel strip into a rounded tube and passing it through a series of forming rollers to obtain a longitudinal seam. The two edges are then simultaneously heated with a high frequency current and squeezed together to form a bond.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Mild steel (MS) tube is also known as galvanised steel tube or gas and water tube. Benefits of Galvanised tubing include increased strength and life expectancy. Mild Steel Tubes can be plain or socketed and come in a medium or heavy fitting.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

SHS steel is a popular type of structural steel tube with four equal sides that gives it a symmetrical appearance. SHS stands for square hollow section. It has a flat surface that is easy for joining and welding, with minimal edge preparation required.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Galvanized steel pipe is a steel pipe that has been coated with zinc. This coating protects the steel from corrosion. It is most commonly used for outdoor construction like fences and handrails, or for some interior plumbing. It is also sometimes called galvanized iron pipe.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Patra is manufactured using ingots casted from low quality raw material or other commercial grade low quality raw material. HR Coil are made using slabs, blooms and billets of iron ore. These slabs, blooms and billets are cast from pure material.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

GI Pipes. Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges.

Product Details:

The burning bar is a steel pipe filled with alloyed wires that is the fuel. When the end of the burning bar is heated to its kindling temperature and has pure oxygen injected into the pipe a chemical reaction occurs and the fuel wires go exothermic.

Product Details:

RHS Steel, also known as rectangular hollow structural sections are commonly used as standard steel frames which can be loaded from different directions in the structural applications of buildings. RHS Steel uses are endless as its smooth flat surfaces can make construction easier.

Product Details:

Cold rolling (Cr pipes) has the added effect of hardening and strengthening the material. It also improves the surface finish and holds tighter tolerances. SLSS is one of the largest distributors for CR Pipes and has an exhaustive range of sizes and thicknesses.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts steel in the presence of pressurized oxygen to create very high temperatures for cutting.

Product Details:

A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts steel in the presence of pressurized oxygen to create very high temperatures for cutting.

Product Details:

Mild Steel (MS) pipes are manufactured using low carbon (less than 0.25%) steel. Due to low carbon content the pipes do not harden and are easy to use. As MS Pipes are made from mild steel they can easily be welded and formed in various shapes and sizes for pipelining and tubing purposes.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Electric Resistance Welded (ERW) pipe is manufactured by cold forming a flat steel strip into a rounded tube and passing it through a series of forming rollers to obtain a longitudinal seam. The two edges are then simultaneously heated with a high frequency current and squeezed together to form a bond.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

RHS Steel, also known as rectangular hollow structural sections are commonly used as standard steel frames which can be loaded from different directions in the structural applications of buildings. RHS Steel uses are endless as its smooth flat surfaces can make construction easier.

Product Details:

CRC or Cold Rolled Coil Pipes are another types of pipes. The metal is cold rolled when it is below its recrystallization temperature(mostly at room temperature). This process increases the strength through strain hardening up to 20% and improves the surface finishing along with the tolerances.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts steel in the presence of pressurized oxygen to create very high temperatures for cutting.

Product Details:

Handrail Tubing is generally used for structural purposes and applications that range from aesthetic to highly functional – Decoration, construction, hardware, mechanical structure, chemical equipment, pulp and paper, aerospace, nuclear engineering and heat treating industries, boiler, handrail, doors

Product Details:

A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts steel in the presence of pressurized oxygen to create very high temperatures for cutting.