Steel Sheets & Plates

Product Details:

We are renowned dealers in the best quality MS Sheet/Plate having longer durability. We focus on providing only the premium quality products to all our clientele hence procure plates are tested using different quality parameters to ensure the quality. MS plates are corrosion and heat resistant and known for high tensile strength. We offer MS Plate of various dimensions as per requirements of clients. Make of these Sheet Plates are from SAIL/TATA/Jindal.

Product Details:

The Sailma 350 High Tensile Structural Steel Plates is planned to give astonishing welding and bowing properties and it offers liberal potential results for assets in material costs, changing and giving.

Product Details:

Wear-resistant steel is tougher and harder than conventional steel plate and can last up to 4 times longer than conventional high-strength steel. SSAB's popular grades of Hardox® AR steel include AR400, AR450, AR500, AR550 and AR600. The numbers refer to their hardness level as measured on the Brinell hardness scale.

Product Details:

Rockstar plates are available in three nominal hardness levels: 400, 450 and 500 BHN. Rockstar plates are optimised to provide high hardness, toughness, good formability and weldability for easy and quick fabrication. Up to 3500mm, higher width can be provided with case to case basis, depending on thickness.

Product Details:

Boiler quality plates, also known as pressure vessel plates, are produced to make supreme quality carbon steel plates intended for use in welded pressure vessels where notch toughness is important. The steel is killed and can be normalized as it conforms to fine austenitic grain size requirements.

Product Details:

Mild Steel Plate are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Hot rolled steel is steel that has been roll-pressed at very high temperatures—over 1,700??F, which is above the re-crystallization temperature for most steels.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. ... This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal.

Product Details:

Hot Rolled plate are made by continuous rolling of steel at high temperature, generally over 1,000 degrees Fahrenheit. The process involves passing metal sheets, produced from billets, through rollers above the metal's (steel) recrystallization temperature.

Product Details:

We are renowned dealers in the best quality MS Sheet/Plate having longer durability. We focus on providing only the premium quality products to all our clientele hence procure plates are tested using different quality parameters to ensure the quality. MS plates are corrosion and heat resistant and known for high tensile strength. We offer MS Plate of various dimensions as per requirements of clients. Make of these Sheet Plates are from SAIL/TATA/Jindal.

Product Details:

Hot Rolled (HR) Coils are made by continuous rolling of steel at high temperature, generally over 1,000 degrees Fahrenheit. The process involves passing metal sheets, produced from billets, through rollers above the metal's (steel) recrystallization temperature.

Product Details:

The manufacturing of Cold Rolled (CR) coils is carried out using the rolling (metalworking) processes. For CR coils, the temperature of the steel is maintained below its re-crystallization temperature (usually room temperature). After the steel is melted below its re-crystallization temperature, it is passed through pairs of rolls (between the small gaps) to reduce its thickness and achieve uniformity. This process of manufacturing CR coils is termed as ‘cold rolling’.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. ... This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal.

Product Details:

Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. ... This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Sail Hard Plates or wear resistance plates are special quality plates that can withstand immense pressure and are corrosion resistant. These plates are manufactured to perform long in the harshest conditions.

Product Details:

Corten steel plates are a low cost, low maintenance solution for structural and decorative applications. Overall benefits of using weathering steel sheets include: Provides natural corrosion resistance. Requires no paint or weatherproofing.

Product Details:

Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox® 450 Tuf). The products can be used in many different components and structures that are subject to wear.

Product Details:

Rockstar plates are available in three nominal hardness levels: 400, 450 and 500 BHN. Rockstar plates are optimised to provide high hardness, toughness, good formability and weldability for easy and quick fabrication. Up to 3500mm, higher width can be provided with case to case basis, depending on thickness.

Product Details:

Chequered metal sheets are used in many fields. The most popular is used as tread plate. The new and modern use is as architectural metal materials used in wall and ceiling cladding. It is also used as decoration and protective sheets in some designs of doors, chairs, furniture and industrial uses.

Product Details:

GI Corrugated Sheet is a construction material ideal for roofing needs. It is made with hot-dipped galvanized metal, cold rolled to produce a pattern that increases its bending and malleability strength.

Product Details:

IRSM 41-97 Steel Plate is a creep resistant and has high rupture strength. The plates can be machined and worked upon. They have close tolerance and soft finish. The material is corrosion resistant in aqueous media.

Product Details:

We are renowned dealers in the best quality MS Sheet/Plate having longer durability. We focus on providing only the premium quality products to all our clientele hence procure plates are tested using different quality parameters to ensure the quality. MS plates are corrosion and heat resistant and known for high tensile strength. We offer MS Plate of various dimensions as per requirements of clients. Make of these Sheet Plates are from SAIL/TATA/Jindal.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

We are renowned dealers in the best quality MS Sheet/Plate having longer durability. We focus on providing only the premium quality products to all our clientele hence procure plates are tested using different quality parameters to ensure the quality. MS plates are corrosion and heat resistant and known for high tensile strength. We offer MS Plate of various dimensions as per requirements of clients. Make of these Sheet Plates are from SAIL/TATA/Jindal.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Hot-rolling refers to a mill process in which you roll the steel at a temperature above its recrystallization temperature; a heat that typically exceeds 1000° F. When steel is heated past its recrystallization point, it becomes more malleable and can be properly formed and shaped.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Cold rolled steel is essentially hot rolled steel that has been through further processing. Once hot rolled steel has cooled, it is then re-rolled at room temperature to achieve more exact dimensions and better surface qualities.

Product Details:

Galvanized corrugated sheets (GC sheets) : The most basic of the steel roofing sheets is the galvanized corrugated sheets. These sheets are created using steel as the base and a layer of Zinc is created above the inner steel layer which gives an added protection to the steel.

Product Details:

Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. ... This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Carbon Steel Plates are intended for use in pressure vessels where increased strength is is important.For plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised. For A 516 grade 70, which is one of most popular steels.

Product Details:

Wear plates are abrasion resistant plates or liners that are used to reduce wear and tear in surfaces that are exposed to intense rolling abrasion and impact.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Boiler quality plates, also known as pressure vessel plates, are produced to make supreme quality carbon steel plates intended for use in welded pressure vessels where notch toughness is important. The steel is killed and can be normalized as it conforms to fine austenitic grain size requirements.

Product Details:

GP Sheet is Galvanized Plain Sheet which is manufactured by Zinc - coating on CR Sheet. Physically it looks silver - Shiny material. Following are the types of GP Sheets in terms of Thickness & Gauge.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

The manufacturing of Cold Rolled (CR) coils is carried out using the rolling (metalworking) processes. For CR coils, the temperature of the steel is maintained below its re-crystallization temperature (usually room temperature). After the steel is melted below its re-crystallization temperature, it is passed through pairs of rolls (between the small gaps) to reduce its thickness and achieve uniformity. This process of manufacturing CR coils is termed as ‘cold rolling’.

Product Details:

The manufacturing of Cold Rolled (CR) coils is carried out using the rolling (metalworking) processes. For CR coils, the temperature of the steel is maintained below its re-crystallization temperature (usually room temperature). After the steel is melted below its re-crystallization temperature, it is passed through pairs of rolls (between the small gaps) to reduce its thickness and achieve uniformity. This process of manufacturing CR coils is termed as ‘cold rolling’.

Product Details:

Chequered metal sheets are used in many fields. The most popular is used as tread plate. The new and modern use is as architectural metal materials used in wall and ceiling cladding. It is also used as decoration and protective sheets in some designs of doors, chairs, furniture and industrial uses